Sullair SUPERVISOR CONTROLLER Series - Table of Contents

Section 1 page
SAFETY
1 1.1 GENERAL
1 1.2 ELECTRIC SHOCK
1 1.3 VARIABLE SPEED DRIVE
1 1.4 DECALS
Section 2
SUPERVISOR
DESCRIPTION
5 2.1 SUPERVISOR KEYBOARD LAYOUT
5 2.2 MAIN DISPLAY
5 2.3 FUNCTION MENU
6 2.4 STATUS- CURRENT PRESSURES, TEMPERATURES,
INPUTS AND OUTPUTS
6 2.5 CONTROL PARAMETERS- PRESSURE, TEMPERATURE
AND TIMER SETTINGS
7 2.6 MAINTENANCE- PREVENTIVE MAINTENANCE
INFORMATION AND TIMERS
7 2.7 FAULT LOG- LOG OF PREVIOUS FAULTS
7 2.8 SENSOR LOG
7 2.9 SEQUENCING- SEQUENCING & COMMUNICATION
PARAMETERS
8 2.10 SYSTEM DISPLAY- DISPLAY OF MODES OF MACHINES
IN A SEQUENCING SYSTEM
8 2.11 CALIBRATION- CORRECTION FACTORS FOR PRESSURES
10 Table 2-1 Supervisor Controller Menu Tree
Section 3
START-UP
PROCEDURES
11 3.1 MOTOR ROTATION DIRECTION CHECK
11 3.2 INITIAL START-UP PROCEDURE
11 3.3 SUBSEQUENT START-UP PROCEDURE
11 3.4 SHUTDOWN PROCEDURE
TABLE OF CONTENTS
OPERATOR IS REQUIRED TO READ
ENTIRE INSTRUCTION MANUAL