EasyManua.ls Logo

Sullair TS-20 - Initial Compressor Start-Up Procedure; Subsequent Compressor Start-Up; Compressor Shutdown Procedure

Sullair TS-20
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section 3
SPECIFICATIONS
15
3.1 SULLAIR TS-20 SPECIFICATIONS
50 Hz Model
DIMENSIONS
TS-20 KW M
3
/MIN BAR LENGTH WIDTH HEIGHT (I) WEIGHT (II)
(MM) (MM) (MM) (KG)
100L 75 15 7.5 3048 1829 1727 3674
100H 75 14.1 8.5 3048 1829 1727 3674
100HH 75 12.1 10 3048 1829 1727 3674
125L 93 19.5 7.5 3048 1829 1727 3719
125H 93 17.8 8.5 3048 1829 1727 3719
125HH 93 16.4 10 3048 1829 1727 3719
150L 112 22.3 7.5 3048 1829 1727 3810
150H 112 20.5 8.5 3048 1829 1727 3810
150HH 112 19.5 10 3048 1829 1727 3810
200H 150 26.6 8.5 3048 1829 1727 3900
200HH 150 25.6 10 3048 1829 1727 3900
60 Hz Model
DIMENSIONS
TS-20 HP ACFM PSIG LENGTH WIDTH HEIGHT (I) WEIGHT (II)
(IN.) (IN.) (IN.) (LBS.)
100L 100 560 110 120 72 68 8100
100H 100 515 125 120 72 68 8100
125L 125 694 110 120 72 68 8200
125H 125 635 125 120 72 68 8200
150L 150 827 110 120 72 68 8400
150H 150 755 125 120 72 68 8400
200L 200 1041 110 120 72 68 8600
200H 200 965 125 120 72 68 8600
250L 250 1142 110 120 72 68 8800
(I) 78in./198 cm required to service separator filter elements.
(II) With enclosure.
COMPRESSOR: STANDARD MODELS
Type: Rotary Screw
Standard Operating Pressure (III) : See Specifications
Bearing Type Anti-Friction
Ambient Temperature (Max.) (IV) : 105ºF (41ºC)
Cooling: Pressurized Fluid
Lubricant: Sullube
Sump Capacity: 30 gallons (114 liters)
Control: Electro-Pneumatic
MOTOR: (50 Hz Compressors) STANDARD MODELS
Size: 100 - 150 HP/75 - 112KW
Type: Open Dripproof, Three Phase, 50 Cycles
A.C., 105ºF (41ºC) Maximum Ambient Temperature
Starter: 380/415V Full Voltage Magnetic
Speed: 1500 RPM
(III) Special compressors are available for operation at higher pressures.
(IV) Special compressors are available for operation in higher ambient temperatures.

Table of Contents

Related product manuals