WSPC USER INTERFACE MANUAL SECTION 4
36
SAVING PARAMETER SETTINGS
The settings for the current control parameters
displayed on the Adjustments display can be saved
to a file which can be accessed and loaded to the
WS Controller at a later date.
To save the current parameter settings:
1. Access the “Adjustments” display by clicking
on the “Adjustments” tab.
2. Click the Load/Save button on the “Adjust-
ments” display. See Figure 4-17.
3. The “Machine Profiles” window will appear.
4. Click “Read from Controller” to load the cur-
rent parameter settings from the controller to
the WSPC.
5. The program will read the settings from the
controller, and will generate a new profile.
The new name will appear on the list as a
“New Profile”
EDITING AND SEARCHING MACHINE PROFILES
The descriptions may be edited to make searching
easier. This is helpful if many profiles are saved on
your PC.
1. Click on a profile to select it.
2. Click the “Edit” button.
3. Click in the Category 1 or Category 2
descriptions at the top of the page, and edit
as desired. See Figure 4-18.
4. Click the “Save Edits” button. To sort and/or
filter the Machine Profile name list:
a. Sort a column by clicking in the top
space above of a column by which val-
ues are to be sorted. One click will sort
the column in ascending order. A second
click will sort the column in descending
order. Click the “Clear Sort” button to
clear all sorting.
b. Filter a column by clicking on the expan-
sion arrow in the space above the col-
umn containing the filter criteria. The
arrow will present a list of the contents of
the column. Select the item in the list by
which the column is to be filtered. Click
the “Clear Filter” to show all profiles.
c. Delete a Machine Profile by clicking on
the profile name and then clicking
“Delete.” A confirmation dialog box will
appear. Click “Yes” to confirm deletion or
“No” to cancel.
Figure 4-17: Load/Save Button
To Next Page
Loading...