To Next Page
N
nbowersAug 13, 2025
Why does the motor of my Sulzer XJ keep tripping out?
- LLauren YangAug 14, 2025
If your Sulzer Water Pump's motor trips out, several factors could be responsible: * The pump might be rotating in the wrong direction, in which case you should shift phases. * The water temperature may be too high (exceeding 40 ºC), so check the water temperature. * The impeller could be blocked; inspect for obstructions like stones or pieces of wood. * Low voltage may be the issue, possibly due to long cables or an inadequate power supply (like a generator). Therefore, you should check the cables and power supply.
General
