OPERATION
Starting
Close the circuit breaker by pushing up the handle.
Press the power switch.
The indicator in the switch will light. The compressor will start. Any items drawing power from
the compressor will start. Verify cooling fan is running and there is airflow out of the top of the
compressor.
Stopping
At the compressor, press the power switch.
The indicator light in the switch will go off. The compressor will stop. Any items drawing power
from the compressor will stop.
Restarting After a Power Failure
If the compressor stops due to a power interruption, it is designed to restart immediately after
the power has been restored. If the compressor stops for other reasons, compressor
troubleshooting is required.
To Next Page
Loading...
