MPE-200 Guide to Operations Page 19
7. SLEEP MODE
The MPE-200 can be turned off from the front panel by pressing and
holding the Master display, then with the Master screen held, press the
Input display for one second. This turns off the analog power and
displays a flashing green beacon as a reminder that the MPE-200 is
only sleeping. To wake it up, press the Input display for ½ second.
This unit can also be put to sleep by pressing and holding the input
encoder, pressing the input LCD, releasing the encoder, and holding
the input LCD until the unit turns off. This is great for one-handed
operation, and for turning off slave units (MPE-200S, EQ-200S).
To Next Page
Loading...