EasyManua.ls Logo

Summit SP - INTRODUCTION; SAFETY

Summit SP
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation, Operation, and Maintenance Manual
ii SUMMIT PUMP MODEL DSR
1. INTRODUCTION
This Installation, Operation, and Maintenance Manual is designed to help you achieve the
best performance and longest life from your Summit Pump. This pump is a vertical case
centrifugal pump with enclosed or open impeller impeller. It is designed for general
slurry service.
If there are any questions regarding this pump or its application, which are not covered in
this manual, please contact your local Summit Pump distributor.
For information or technical assistance on the driver service, contact the driver
manufacturer’s local dealer or representative.
SAFETY
The following message types are used in this manual to alert maintenance personnel to
procedures that require special attention for the protection and safety of both personnel
and equipment:
WARNING!
Failure to comply with the warnings in this
manual could result in personal injury or
death.
CAUTION!
Failure to comply with the cautions in this
manual could result in destruction of, or
damage to equipment.
NOTE: Identifies a condition or procedure
which is essential to proper
equipment operation.

Related product manuals