18 Sun Fire V215 and V245 Servers Administration Guide • September 2006
At the Solaris OS prompt, issue the uadmin command to halt the Solaris OS and to
return to the ok prompt.
2. Switch from the system console prompt to the SC console prompt by issuing the
#. escape sequence.
3. Issue the poweroff command.
4. Issue the poweron command.
5. Reconnect to the system console using the console command.
The server outputs various messages, followed by the ok prompt.
# uadmin 2 0
WARNING: proc_exit: init exited
syncing file systems... done
Program terminated
ok
ok #.
sc>
sc> poweroff -fy
SC Alert: SC Request to Power Off Host Immediately.
sc> poweron
sc> SC Alert: Host System has Reset
sc> console -f
Enter #. to return to ALOM.
To Next Page
Loading...
