Chapter 1 Performing General Administrative Tasks 19
Controlling the Locator Indicator
This section explains how to turn the Locator indicator on and off and how to check
the status of the Locator indicator.
▼ To Turn the Locator Indicator On
● Do one of the following:
■ As superuser, type:
■ At the ALOM command-line interface, type:
▼ To Turn the Locator Indicator Off
● Do one of the following:
■ As superuser, type:
■ At the ALOM command-line interface, type:
# /usr/sbin/locator -n
sc> setlocator on
# /usr/sbin/locator -f
sc> setlocator off
To Next Page
Loading...
