29
CHAPTER
3
SunVTS
The Sun Validation and Test Suite (SunVTS) is a software suite that performs system,
subsystem, and configuration testing. You can view and control a SunVTS session
over a network. Using a remote system, you can view the progress of a testing
session, change testing options, and control all testing features of another machine
on the network.
The following topics are discussed:
■ “SunVTS Test Modes” on page 29
■ “SunVTS Software and Security” on page 30
■ “SunVTS Installation” on page 30
■ “SunVTS Documentation” on page 31
SunVTS Test Modes
You can run SunVTS software in five different test modes:
■ Connection test mode, which provides a low-stress, quick test of the availability and
connectivity of selected devices. These tests are nonintrusive, meaning that they
release the devices after a quick test and do not place a heavy load on the system.
■ Functional test mode, which provides a robust test of the system and devices. This
test mode uses the system resources for thorough testing, and it assumes that no
other applications are running. This mode is the default test mode.
■ Exclusive test mode, which enables you to perform the tests that require no other
SunVTS or applications running at the same time.
■ Online test mode, which enables you to perform SunVTS testing while applications
are running.
■ Auto Config mode, which simplifies the SunVTS configuration process by
automatically assigning a predetermined set of test options.
To Next Page
Loading...
