1
CHAPTER
1
Planning for the Installation
This chapter describes the requirements for preparing the customer site for
installation of the Sun Storage J4200/J4400 array. It contains the following sections:
■ “Customer Obligations” on page 1
■ “Safety Information” on page 1
■ “Site Wiring and Power Requirements” on page 3
Customer Obligations
The customer is obliged to inform Sun Microsystems, Inc. of any and all ordinances
and regulations that might affect the installation. The customer is responsible for
meeting all government codes and regulations concerning facilities. The customer is
also required to do the following:
■ Comply with all local, national, and international codes covered in this
specification. The subjects covered include fire and safety, building, and
electrical codes.
■ Document and inform Sun Microsystems, Inc. of any deviations from this
specification.
Safety Information
Install the Sun Storage J4200/J4400 array in accordance with the local safety codes
and regulations at the facility site. Make sure that you read the safety precautions in
the Sun StorageTek Regulatory and Safety Compliance Manual.
The following sections contain additional safety information for the local facility:
To Next Page
Loading...
Need help?
General
