17
CHAPTER
3
Sun Storage J4200/J4400
Specifications
This chapter describes the physical, environmental, and electrical requirements for
the Sun Storage J4200/J4400 arrays. Where information for both arrays is the same, a
single table is used. This chapter contains the following sections:
■ “Dimension and Weight Specifications” on page 17
■ “Environmental Requirements” on page 18
■ “Electrical Requirements” on page 21
Dimension and Weight Specifications
The floor space at the installation site must be strong enough to support the
combined weight of the cabinet, controller trays, expansion trays, and associated
equipment. The site also requires sufficient space for installation, operation, and
servicing the arrays and sufficient ventilation to provide a free flow of air to the unit.
The total weight of an expansion tray depends on the number of drives installed.
TABLE 3-1 provides the physical dimensions and weight of the J4200 and the J4400
arrays.
TABLE 3-1 Dimensions and Weight (with rails)
Height Width Depth
Weight (Fully
Populated)
J4200
3.44 in. 17.52 in. 24.05 in. 59.61 lb.
8.74 cm 44.5 cm 61.1 cm 27.04 kg
To Next Page
Loading...
Need help?
General
