- 21 -
SET FRAME SCAN
LEFT LIMIT POSITION
IRIS OPEN CONTINUE
SET FRAME SCAN
RIGHT LIMIT POSITION
IRIS OPEN CONTINUE
FRAME SPEED
It controls the speed when the dome does the 360° scan or frame scan.
DWELL TIME
It represents the residence time the dome stops at each preset during the
patrol/auto scan.
12. Camera Configuration
This function enables the auto scan of the camera between a set left and
right boundary. It can be set using PRESET 81+Add & PRESET 82+Add
as well. When setting up the frame scan, direction keys are used to set the
position of the boundary. Thus, please click the Iris+ key to confirm your
setting.
HDD Info:
The information of the
storage device (TF card).
LOG:
Access the events, alarm
and activity record of camera.
Version:
Check the serial number
of the camera, and the
build date of the firmware.
Reboot:
Restart the camera.
To Next Page
Loading...
