- 30 -
Step 3: Enable the motion
detection (in Video Detect or
Video Motion).
See Chapter 15. Then enable
the FTP option.
Snapshots: You must also
enable snapshot in Video
Detect.
Videos: You must also enable
record in Video Detect and
have a storage media in order
to upload the videos to FTP.
Like many other network
cameras, you will need to have
a TF card (install inside the
camera’s built-in memory slot)
or a NVR as a forwarding
transfer station to your FTP.
This is required because
without storage media, the
camera does not have enough
RAM to hold large video files
before it establishes a connec-
tion with your FTP.
18. Reset the Camera
Option 1: Reset the camera parameter and configuration(IE/VMS/CMS)
Device Config → Default
Option 2: Reset the camera parameter and configuration
Press the button inside the camera manually.
(Option 2 is only available for model 405-ECO WiFi version.)
Option 3: Reset camera network setting including ports and IP address
Device Manager → Reset Config
Option 4: Reset/modify camera network setting after lock-up (time out
login error)
Download the third party tool called ONVIF Device Manager
Option 5: Reset the password
You can reset the password if you’ve set up and remembered the security
quesstions for your device in Device Config-Account-Safe Questions.
Option 6: Reset Tool (Factory Reset)
Please go to http://reset.sunba.net to download the reset tool and send
the safety code to Sunba Support Team (support@sunba.net) to retrieve a
reset code. The reset code is exclusive for each individual safety code.
To Next Page
Loading...
