–MAX–
–MIN–
ONE CUP
TWO CUP
CENTRE
2.TURN
1. ALIGN
& INSERT
3mm
1. Check water tank is full
- Barista Tip: use filtered
water for best results.
2. Start up
- Press the STANDBY button. The 1 CUP,
2 CUP & STEAM buttons will pulse to
indicate the machine is heating up.
- When STANDBY, 1 CUP, 2 CUP & STEAM
buttons are illuminated, the machine is
ready for use.
3. Warm up with hot water
- Position steam wand in cup.
- Turn dial to HOT WATER.
- Quarter fill cup with hot water.
- Return dial to OFF position.
- Empty cup after 20 – 30 secs.
4. Select filter baskets
- Select either the 1 CUP or 2 CUP filter
basket.
- Insert filter basket into group handle.
10
Making your first café quality coffee
To Next Page
Loading...
Need help?
General
