-14-
(4) ON/Off: If you use this channel,please click on. Otherwise,please
click off.
(5)CODEC Tx Gain: as above
(6)CODEC Rx Gain: as above
(7) SIP From: Caller ID transfer
z Tel/User(Standard): If you need to register to Asterisk and proxy
server,please choose this option. And how to transfer the caller ID
to LAN,please refer 22.How to setup Asterisk to receive Caller ID
from SC-375 (page 43)
SC-375-2 will send the message as follows in the Packet.
From: " caller number " <sip:3001@192.168.0.228>;tag=51088abb
z Tel/Tel :
SC-375 will send the message as follows in the Packet.
From: "caller number" <sip: caller number @192.168.0.228>;tag=6ac93f7c
※Please note:If you choose this option,please don’t register to
Asterisk and proxy server. Please only fill proxy server ip and
choose Active: on (else field empty) in sip setting/service demain
z User/Tel
SC-375 will send the message as follows in the Packet.
From: " Username " <sip: caller number @192.168.0.228>;tag=7f130947
※If you choose this option,please don’t register to Asterisk and
proxy server. Please only fill proxy server ip,Username and
choose Active: on (else field empty) in sip setting/service
demain
(8)Presentation CLIR : If you need to block the Caller Id for call
termination,please choose Suppression
(9)Mobile PIN Code:If you need to unlock pin code via SC-375,you can
To Next Page
Loading...
