EasyManuals Logo

Sunfar E300-2S0002(B) User Manual

Sunfar E300-2S0002(B)
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
SUNFAR E300 SERIES
2.3 Maintenance
Do not touch radiator after power-off at least 10 minutes.
3. Attention Notes:
2.1.9. Be sure to install inverter in a well-ventilated ambient.
2.1.10. Motor temperature under inverter control will be higher than at main supply
control, which is normal phenomenon.
2.1.11. Normal motor cannot run at low speed for a long time, so user should select
special motor for inverter or reduce motor load under low speed.
2.1.12. When altitude is over 1000m, inverter will be valid to decrease rated current, and
rated current will decrease 10% when attitude is increased 1500m.
Be sure not to connect inverter output terminals with filter capacitors
or other surge absorbers.
4 Dispose:
When you dispose inverter and its parts, please pay attention to:
Capacitor: The capacitors in inverter may explode when they are burned.
Plastic: Poisonous gas may be generated when front panel is burned, please pay attention to
waste gas when plastic parts are burned.
Method: Please dispose inverter as industry waste.
E300 Series Mini-type Integrated Universal Inverter Manual

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sunfar E300-2S0002(B) and is the answer not in the manual?

Sunfar E300-2S0002(B) Specifications

General IconGeneral
BrandSunfar
ModelE300-2S0002(B)
CategoryInverter
LanguageEnglish

Related product manuals