Web Control
In the kit, there are two control methods: Web control and Python program control.
In this chapter, we are provided with method of web control. So we can open the browser on different
devices, including computer, cellphone（Recommended）, tablet and so on. You can use most functions of
Picar-4wd, such as obstacle avoidance, line-following, object following and voltage check.
Note: Check the next chapter if you want to use python to control Picar-4wd.
Boot Web Control
Input the command and start up the web control program.
cd /home/pi/picar-4wd/
picar-4wd web-example
As the program is running, on the browser, type the IP of the Raspberry Pi, and you can enter the Web
interface.
To Next Page
Loading...
