If You Have No Screen
If we don't have a screen, we can directly write the Raspbian system to the Micro SD card and we can
control the Raspberry Pi on PC remotely by directly modifying the configuration file of the network
settings in the Micro SD card.
Required Components
Burn System
Step 1
Prepare the tool of image burning. Here we use the balenaEtcher. You can download the software from
the link:
https://www.balena.io/etcher/
Step 2
Download the complete image on the official website by clicking this link:
https://www.raspberrypi.org/downloads/raspbian/
. There are three different kinds of Raspbian system
available, You are recommend to install the version：Raspbian Buster with desktop and recommended
software.
To Next Page
Loading...