SunFounder pisloth
No protective board?
You are recommend to use 18650 batteries without a protective board. Otherwise, the robot may be cut power and
stop running because of the overcurrent protection of the protective board.
Battery capacity?
In order to keep the robot working for a long time, use large-capacity batteries as much as possible. It is recommended
to purchase batteries with a capacity of 3000mAh and above.
5.2 Filezilla Software
The File Transfer Protocol (FTP) is a standard communication protocol used for the transfer of computer files from a
server to a client on a computer network.
Filezilla is an open source software that not only supports FTP, but also FTP over TLS (FTPS) and SFTP. We can
use Filezilla to upload local files (such as pictures and audio, etc.) to the Raspberry Pi, or download files from the
Raspberry Pi to the local.
Step 1: Download Filezilla.
Download the client from Filezilla’s official website, Filezilla has a very good tutorial, please refer to: Documentation
- Filezilla.
Step 2: Connect to Raspberry Pi
After a quick install open it up and now connect it to an FTP server. It has 3 ways to connect, here we use the Quick
Connect bar. Enter the hostname/IP, username, password and port (22), then click Quick Connect or press Enter
to connect to the server.
Note: Quick Connect is a good way to test your login information. If you want to create a permanent entry, you can
102 Chapter 5. Appendix
To Next Page
Loading...
