User Manual 1 Safety Instructions
5
There is a risk of inverter damage if it is improperly serviced.
Use only accessories and spare parts approved by the inverter
manufacturer. Never modify the inverter or other components of the
inverter. Otherwise it will cause loss of any or all warranty rights.
There is a risk of inverter damage due to electrostatic discharge!
The printed circuit boards contain components sensitive to electrostatic
discharge. Wear a grounding wrist band when handling the boards. Avoid
unnecessary touch with the boards during replacement.
Others
The selected country settings can be changed by service personnel only!
Unauthorized alternation of the country settings should be prohibited.
Otherwise it may cause a breach of the type-certificate marking.
All safety instructions, warning labels and nameplate on the inverter body:
y Must be clearly visible;
y Must not be removed, covered or pasted.
These regulations should also be followed:
y The regulations related to the electricity fed into grid;
y The safety instructions related to PV arrays;
y The safety instructions related to other electrical device.
To Next Page
Loading...
Need help?
General