10 Operation of LCD Display Panel User Manual
68
10.7 Start and Stop Inverter
Main Screen（Press ENTER） →Menu（Press j×2） → Start/Stop（Press
ENTER）
Press j to choose “Start”/”Stop”
and press ENTER to confirm the
choice.
Press ENTER to confirm.
10.8 Input Parameter Settings Password
The parameter settings are protected by the password. If you want to set the
inverter’s parameters, you have to input the correct password.
Step 1 Press ENTER to enter into “Menu” screen.
Step 2 Press j to move the cursor to “Set-param” menu item and confirm by
pressing ENTER.
Step 3 A password confirmation screen will occur.
Press h to move cursor right and Press j to
input the password 111111.
Step 4 Press ENTER
to confirm the password and enter
the “Set-param” sub menu.
To Next Page
Loading...
Need help?
General