All electrical connections must be in accordance with local and
national standards.
Only with the permission of the utility grid, the inverter can be
connected to the utility grid.
Danger to life from electric shocks due to live voltage
Do not open the enclosure at any time. Unauthorized opening will void
guarantee and warranty claims and in most cases terminate the
operating license.
Risk of inverter damage or personal injury
Do not pull out the PV connectors and AC connector when the
inverter is running.
Disconnect the AC circuit breaker and set the DC load-break switch
of the inverter to OFF. Wait at least 10 minutes for the internal
capacitors to discharge.
Ensure that there is no voltage or current before pulling any
connector.
All safety instructions, warning labels, and nameplate on the inverter:
Must be clearly legible.
Should not be removed or covered.
Risk of burns due to hot components!
Do not touch any hot parts (such as heat sinks) during operation. Only
the LCD panel and the DC switch can safely be touched at any time.
To Next Page
Loading...
