1 Safety User Manual
2
There is a danger from a hot surface that may exceed 60°C.
Danger to life due to high voltages!
Only qualified personnel can open and service the inverter.
Check the user manual before service!
Danger to life from electric shock due to live voltage
y
Do not open the enclosure when the inverter is working.
y
When the enclosure lid is removed, live components can be touched which
can result in death or serious injury due to electric shock.
Danger to life from electric shock due to damaged inverter
y
Only operate the inverter when it is technically faultless and in a safe state.
y
Operating a damaged inverter can lead to hazardous situations that can result
in death or serious injuries due to electric shock.
Risk of inverter damage or personal injury
DO not pull out the PV connectors while the inverter is under AC loads!
De-energize from all multiple power sources and verify that there is no voltage.
All the warning labels and nameplate on the inverter body:
y
must be clearly visible; and
y
must not be removed, covered or pasted.
Risk of burns due to hot components
DO not touch the hot parts (such as heat sink) during operation. Only the LCD
panel and the DC switch can be touched.
To Next Page
Loading...
Need help?
General
