What to do if Sunquest Personal Care Products lamps fail to light?
If the lamps in your Sunquest Personal Care Products unit fail to light, first check the AC power source and reset the circuit breaker or replace the fuse if needed. Ensure the unit is properly plugged into the outlet and that the cord connecting the canopy and bench is securely connected. Also, verify that the timer dial is set to a number greater than 0.
What to do if Sunquest Personal Care Products sunbed does not stay lit?
If your Sunquest Personal Care Products sunbed does not stay lit, begin by checking the AC power source. Reset the circuit breaker or replace the fuse if necessary. You may also check the timer system.
What to do if one or more lamps fail to light in Sunquest Personal Care Products?
If one or more lamps in your Sunquest Personal Care Products unit fail to light, first ensure that each lamp is correctly installed. Try switching an unlit lamp with one that is working. If the new lamp lights up and the old one still doesn't, then replace the old lamp.
Why does the canopy fail to stay in position on Sunquest Personal Care Products?
The gas springs should hold the canopy fully open or allow it to rest fully closed. It's normal for the canopy to creep down if left open for a long time. Keep the canopy closed when not in use. When the gas springs no longer hold the canopy open, replace them.
Inspect the sunbed components for any visible damage upon arrival and report issues to the transportation company.
Consider electrical requirements, room temperature, and ventilation before assembling the sunbed.
Details on hardware inventory and steps for attaching legs and hinge brackets to the sunbed bench.
Instructions for connecting the canopy to the bench power cord and plugging into a suitable outlet.
Precautions for skin preparation, hair products, and essential safety measures prior to using the sunbed.
Table detailing recommended tanning durations by skin type and tanning level for optimal results.
Explanation of the lock switch to monitor or restrict sunbed usage by unauthorized persons.
Step-by-step guide on how to operate the sunbed, including using the face tanner and setting the timer.
Guidelines for daily cleaning of the sunbed's bench and canopy using appropriate non-ammonia disinfectants.
Instructions for performing a deep clean of the sunbed's interior to maintain performance and effectiveness.
Recommendations for regular checks of the sunbed's physical components for signs of wear or damage.
Detailed instructions for safely removing and installing new tanning lamps and starter components.
Procedures for checking the accuracy and proper function of the sunbed's primary and backup timers.
General| Product Type | Tanning Bed |
|---|---|
| Model | PRO 24RSF |
| Brand | Sunquest |
| Number of Lamps | 24 |
| Timer | Yes |
| Cooling System | Yes |
To Next Page
