22
[ Caution ]
When removing the oil filter cover, be sure to prevent the remaining oil in the oil filter from leaking.
6) Cleaning the machine
After each daily operation, clean the sewing machine to
remove any dust or thread pieces left.
Open bed cover (left), bed front cover or other covers for
cleaning. You may also use air guns.
Take out the backside rubber cap of the bed ① at the back of
the sewing machine. Clean out dust or any residues in the oil
net with a tweezer or an air gun once a week.
[ Figure 23 ]
5) Cleaning the oil filter
Oil will not supply smoothly if dust gets built up in oil filter
①. Check the oil filter once every six months.
Check the oil filter through the oil window if there is no or
only little amount of oil being supplied.
Before checking the oil filter, remove the oil filter cover ②.
Clean dust build-ups inside the oil filter.
[ Figure 22 ]
①
①
②
To Next Page
Loading...
