61
1100
SC 7310 (Left Fabric Trimmer)
⑦
⑥
②
⑧
③
※ Adjusting the mes system
1) Installation of accessories
The suction pipe(B)①, the suction pipe(B) holder⑤, the curved hose⑦, and the speed controller should be installed in the
following order:
(1) Install the speed controller⑧ on the floor of the left mes driving base② as shown in the figure.
(2) Insert the suction pipe(B) ① into the hole on the surface of the left mes driving base② and fix it with the screw③.
(3) Use the screw④ fixed on the rear side of the sewing machine and install the suction pipe(B) holder⑤.
(4) Install the suction pipe(B) ① at the holder⑤.
(5) Use the hose band⑥ and fix the curved hose⑦ to the suction pipe.
[ Figure 102 ]
④
⑤
①
Turn off the motor switch before making any adjustments. Make sure that the motor is completely
turned off.
Warning
To Next Page
Loading...
