Form 43343320
Dec 2017 -65-
“U” Bolt Clamp, 4” OD Tube
5/16-18 Hex Nut (2 per “U” Bolt)
Tube Support/Hanger Bracket, 13”
Reflector, 4’-11½” long (5’ section only; 1 per 5 ft. body section)
Reflector, 9’-11½” long (10’ section only; 1 per 10 ft. body section)
Corner Reflector Package (optional)
10’ Tube Assembly Kit, 4” OD, ATC steel with one 6-hole flange (start tube)
10’ Tube Assembly Kit, 4” OD, ALC steel with one 12-radial hole flange (start tube)
10’ Tube Assembly Kit, 4” OD, HRS steel without flanges (extension tube & exhaust tube)
10’ Tube Assembly Kit, 4” OD, ALC steel without flanges (extension tube & exhaust tube)
5’ Tube Assembly Kit, 4” OD, HRS steel without flanges (extension tube & exhaust tube)
5’ Tube Assembly Kit, 4” OD, ALC steel without flanges (extension tube & exhaust tube)
#10 x ½” Self-Drilling Screw
4” OD Tube Compression Coupling w/bolts
4” OD U-Bend (Required for SPU Only)
U-Bend Reflector (SPU Option)
ALC = Heat Treated, Aluminized Steel
Turbulator (See Section 5.0) for quantities)
ATC = Heat Treated, Alumi-Therm Steel
* Required on 40ft, 50ft, 60ft and 70ft systems for mounting of burner box.
** Required on 10ft, 20ft and 30ft systems for mounting of burner box.
Note:
1) Screws, Nuts and Washers are standard hardware items and can be purchased at any local hardware store.
2) Please order by PART NUMBER – not by Item Number.
3) Replacement Part Prices are available when ordering.
4) Please refer to complete Model Number when ordering.
ALL ILLUSTRATIONS ARE INTENDED TO GIVE THE GENERAL IMPRESSION OF UNITS ONLY. OTHER COMBINATIONS OF 5 FT.
AND 10 FT. SECTIONS, AND ONES WITH OR WITHOUT THE ELBOW PACKAGE ARE POSSIBLE. PLEASE CONSULT WITH YOUR
SUNSTAR SALES REPRESENTATIVE. WE RESERVE THE RIGHT TO ALTER ANY SPECIFICATION WITHOUT NOTICE.