To Next PageTo Next PageHow to check the spark gap on SunStar SPS?
Ensure that the spark gap is 1/8” between the electrode and the burner casting. The spark electrode should also be clean and free from any debris.
Covers safety warnings, symbols, and installer duties.
Heater description, installation codes, and general requirements.
Critical safety clearances to prevent fire hazards.
Technical specs, model numbers, control options, and ratings.
Lists burner package contents and optional accessories.
Diagrams and guidelines for system configurations and tube section joining.
Physical dimensions of SPS/SPU models and safe hanging techniques.
Step-by-step assembly, turbulators, reflectors, elbows, and U-bends.
Attaching the burner box and connecting the Tube Integrity Safety System.
Regulations, connection procedures, and pressure gauge setup.
Safety, grounding, and wiring diagrams for single/two-stage controls.
Guidelines for flue venting, combustion air supply, and safety.
Procedures for starting, stopping, and understanding operational cycles.
Locating control parts and performing annual cleaning and maintenance.
Step-by-step guides for diagnosing and resolving issues.
Steps for removing and replacing key components like burner and gas valve.
Fields for installation data and a comprehensive list of replacement parts.
Information on safety warning cards and final installation notes.
General