7-46
■■
DESIGN DIVIDE: Dividing the selected design in two
Ex) Dividing design in memory #5 into two: sub-design ① from 0 to 1000 stitches and ② from 1001 to 18294 stitches
900] 0 0 N
901] -28 -3 N
DEL INS EDIT
STITCH 900 is changed to STITCH 901.X=0,
Y=0, and NORMAL CODE was set for STITCH
900.
1. STITCH EDIT
2. DESIGN DIVIDE
3. DESIGN FILTERING
Using the same procedures, set JUMP
CODE.
900] 0 0 N
901] -28 -3 N
DEL INS EDIT
Press to end
Select “YES”to save and “NO”if
not. Press
EDIT DESIGN SAVE ?
[YES] [NO]
Call the design in #5 and press
For data insert, move the cursor to
INS and press
To Next Page
Loading...
Need help?
General
