SM3.6kWLL - Lifelynk X10
Mounting the Inverter
Select a location that provides adequate support for the weight of the inverter.
Install this inverter so that the LCD screen is eye-level for easy operation.
An appropriate ambient temperature lies between -20 ~ 50°C for optimal operation. Battery charging
temperature range lies between 0ºC ~ 50ºC.
Ensure other objects and surfaces are outside of the recommended spaces (500mm each side / above and
below / front) to guarantee heat dissipation and easy access to the wiring / cabling.
ALSO CONSIDER:
Installing the indoor unit, outdoor unit, power supply cable, transmission cable and remote control cable
at least 1 metre away from any television or radio receiver. This will prevent TV reception interference or
radio noise. This will also prevent radio signal interference from external units that might interfere with the
Wi-Fi or GSM monitoring.
If children may approach the unit, take preventive measures so that they cannot reach and touch the unit.
Install the indoor unit on the wall where the height from the oor is higher than 1600mm.
For proper heat dissipation, allow a clearance of approximately 500mm to the side, 500mm above and
below the unit and 1000mm to the front of the unit.
To Next Page
Loading...
Need help?
General