SM3.6kWLL - Lifelynk X9
INSTALLATION
Selecting the Mounting Area
DO NOT install in the following areas:
Areas with high salt content, such as the marine environment. It will deteriorate the metal parts and
possibly lead to water / dampness penetrating the unit.
Areas lled with mineral oil or containing splashed oil or steam such as in kitchens. This will deteriorate
plastic parts of the unit, causing those parts to fail or allow water /damp to penetrate the unit.
Areas that generate substances that adversely affect the equipment, such as sulphuric gas, chlorine gas,
acid, or alkali. These can cause the copper pipes and brazed joints to corrode and fail to conduct
electricity reliably.
Areas that can cause combustible gas to leak, which contains suspended carbon-bre, ammable dust or
volatile inammability such as paint thinner or gasoline.
Areas where there may be gas leaks and where gas may settle around the unit, as this is a re risk.
Areas where animals may urinate on the unit or ammonia may be generated.
High altitude areas (over 4000 metres above sea level).
Environments where precipitation or humidity are above 95%.
Areas where the air circulation is too low.
To Next Page
Loading...
Need help?
General