Need help?Do you have a question about the SunSynk MAX and is the answer not in the manual?
General| Number of MPPTs | 2 |
|---|---|
| Type | Hybrid Inverter |
| Max PV Input Voltage | 500V |
| AC Output Voltage | 230V |
| Frequency | 50Hz/60Hz |
| Battery Voltage | 48V |
| Battery Compatibility | Lithium, Lead Acid |
| Operating Temperature | -25°C to +60°C |
| Cooling Method | Fan |
| Communication | RS485 |
Guidelines for safe installation, operation, and maintenance of the inverter.
Critical safety directives for handling and installing the inverter.
Instructions for correctly connecting the battery to the inverter.
Guidance on essential DC protection components for battery systems.
Specific steps for connecting lithium-ion batteries to the inverter.
Procedure for connecting the inverter to the AC power source.
Essential steps for establishing a proper earth connection for safety.
Schematics for various inverter wiring configurations.
Diagram for connecting multiple inverters in a single-phase parallel setup.
Diagram for parallel inverter setup including a diesel generator.
Schematic for connecting the inverter system to a diesel generator.
Settings for battery capacity, charge, and discharge parameters.
Settings for generator and grid charging modes and parameters.
Configuration of inverter shutdown based on battery levels.
Specific configuration steps for lithium-ion battery banks.
Setting timed schedules for battery charging and discharging.
Configuration options for multi-inverter parallel operation.
Reference for understanding and resolving system fault codes.
To Next Page