Page | 49
SUNSYNK MAX | User Manual
5.14. Program Charge & Discharge Times
To set ‘Charge’ and ‘Discharge’ times, click on the ‘System Mode’ icon after clicking on the
gear icon.
What this page displays:
A setting to prevent the inverter exporting power to the grid - ‘Zero Export’.
The ability to limit power supply to only the household loads - ‘Solar Export’.
Set the power limits to supply only the loads connected to the LOAD port - ‘Priority to Load
Only’.
What you can do from this page:
Set a real time to start and stop charging or discharging the battery.
Choose to charge the battery from the grid or generator.
Limit export power to the grid.
Set the unit to charge the battery from the grid or generator ticking ‘Grid’ or ‘Gen’ and set
what times this needs to occur.
Set the time to discharge the unit to the load or export to the grid by unticking ‘Grid’ and
‘Gen’.
To Next Page
Loading...
Need help?
General