THREE PHASE HI 25/50kW | Installer Manual4
5.2. Display 34
5.2.1. LED indicators 34
5.2.2. Function buttons 34
5.3. LCD operation ow chart 35
5.4. Home page 36
5.5. Status Page 36
5.6. System Flow Page 37
5.7. Setup Page 38
5.8. Basic Setup 39
5.8.1. Set Time (Clock) 39
5.8.2. Set Company Name / Beeper / Auto dim 39
5.8.3. Factory Reset and Lock Code 40
5.9. Battery Setup Page 41
5.10. Generator & Battery Page 42
5.11. Battery Discharge Page 44
5.12. Setting Up a Lithium Battery 46
5.13. Program Charge & Discharge Times 52
5.14. Grid Supply Page 56
5.15. Advanced Settings for Paralleling Inverters 60
5.16. Connecting the DRM’s 63
5.18. Advanced Function Setup 64
5.17. Solar Power Generated 64
5.19. Grid Power 65
5.20. Advanced Settings for Wind Turbines 66
5.21. Advanced Settings for Auxiliary Load 67
6. Operation Modes 70
6.1. Mode I: Basic 70
6.2. Mode II: With Generator 70
6.3. Mode III: With Smart-Load 71
6.4. Mode IV: AC Couple 71
7. Fault Codes 72
8. COMMISSIONING 77
8.1. Start-Up / Shutdown Procedure 77
8.2. Information for Commissioning the Inverter 77
8.3. GDFI Fault 78
To Next Page
Loading...
Need help?
General