To Next PageTo Next Page
Need help?Do you have a question about the SunTech ST310U and is the answer not in the manual?
Details the string format for commands sent from the server to the device.
Explains the string format for reports sent from the device to the server.
Configures network connection details like APN, server IP, and port.
Sets intervals and conditions for sending status reports.
Configures parameters for various input/output events and ignition states.
Configures phone numbers for SMS commands, incoming, and outgoing calls.
Configures features like parking lock, speed limit, power saving, and connection types.
Sets parameters for anti-theft, jamming detection, and virtual ignition features.
Details status reports sent periodically in string or zip format.
Explains emergency reports sent upon critical events, in normal and zip formats.
Describes event reports generated when input lines change status, in normal and zip formats.
Covers alert reports for over-speed, geo-fence breaches, etc., in normal/zip formats.
Details common fields like HDR, DEV_ID, VER, and CMD_ID used in commands.
Command to request the current status and parameters of the device.
Command to retrieve all device parameters and current status settings.
Erases saved reports and disables outputs; initializes device for new customers.
Resets the odometer or traveled distance to zero.
Explains the anti-theft function, its basic conditions, and activation/deactivation.
General
