To Next PageTo Next Page
Need help?Do you have a question about the SunTech ST340 Series and is the answer not in the manual?
Sets up network parameters like Server IP, Port, APN, and User ID for GPRS connection.
Configures intervals and conditions for sending status, keep-alive, and other reports.
Configures input/output events, ignition states, and chattering times for event detection.
Configures circular geo-fence areas, including latitude, longitude, radius, and alerts.
Configures telemetry parameters for odometer, RPM, and vehicle engine information via CAN bus.
Configures anti-theft parameters like jamming detection, panic settings, and ignition alerts.
Enables/disables vehicle tracking and manages tracking positions and status.
Defines geographical points (latitude, longitude) and gaps for tracking a route.
Commands for resetting parameters to factory defaults and rebooting the device.
General| GPS | Yes |
|---|---|
| Acquisition Time (Cold start) | 29s |
| Acquisition Time (Hot start) | 1s |
| Accuracy | 2.5 m |
| Storage Temperature | -40°C ~ +85°C |
| Humidity | 5% to 95% non-condensing |
| Voltage Range | 9V to 36V DC |
| Interface | RS232 |
