Need help?Do you have a question about the SunTech ST3310 and is the answer not in the manual?
Device operates in driving, parking, and emergency modes.
Details report types, storage capacity, and transmission priority.
Parameters can be changed via WCDMA or SMS.
Covers power saving, LED indicators, FOTA, and specific functions like parking lock.
Monitors main power status and alerts on battery errors for applicable models.
Defines the format for command messages sent from the server to the device.
Defines the format for report messages sent from the device to the server.
Configures network parameters and PIN number via WCDMA or SMS.
Enables automatic WCDMA parameter configuration based on SIM card.
Configures parameters related to report intervals for different operational modes.
Configures parameters for device events, including ignition and input/output signals.
Configures WCDMA parameters for SMS and call functionalities.
Configures service parameters like parking lock, speed limits, and power saving modes.
Sets additional parameters like server types and UDP acknowledgement settings.
Configures voltage thresholds for battery protection and charging management.
Configures motion sensor parameters for shock and collision detection.
Provides commands to control specific device functions and retrieve information.
Commands for requesting device status, resetting parameters, and applying presets.
Manages emergency reports and controls output states (enable/disable).
Retrieves SIM identification (IMSI, ICCID) and device software version.
Commands for managing device data, including erasing, initializing, and rebooting.
Requests the local IP address assigned to the SIM card.
Guides for SIM card insertion, backup battery usage, and vehicle mounting.
Details event cable pin assignments and the functions of input/output signals.
Explains immobilizer activation and pulse output behavior with configurable parameters.
Details how to check GPS/WCDMA and battery charger status using LEDs.
Interprets blue LED behavior to diagnose WCDMA connectivity issues.
Interprets red LED behavior to diagnose GPS connectivity and chipset issues.
To Next Page
General
