SunTech ST4500 User Manual

ST4500
User Manual
Suntech International Ltd.

SunTech ST4500 Specifications

General

Brand	SunTech
Model	ST4500
Category	GPS
Language	English

Summary

Introduction

Overview

Operation Mode

Explains the three operational modes: Driving, Parking, and Emergency.

Report

Covers AVL reporting, alert types, and report storage.

Setting Parameter

Features

Power Down

Device's power-saving modes: Sleep and Deep Sleep for reduced consumption.

LED Indicator

Indicates LTE-M1 and GPS states for troubleshooting.

Events

Describes the device's input/output lines and ignition line.

Update Firmware by Over The Air (FOTA)

Allows remote firmware updates via LTE-M1.

Parking Lock

Detects unauthorized movement or driving without ignition.

Over speed

Monitors vehicle speed and alerts for over-speed conditions.

GPS Antenna Checking

Alerts when the GPS antenna is disconnected.

Main Power Checking

Battery Error Alert

Protocol Construction

Commands

Network Parameters Setting

Configures network parameters and PIN for device communication.

Report Parameter Setting

Event Parameter Setting

LTE-M1 Parameter Setting

Service Parameter Setting

Additional Parameters

Set Parameters of Main Voltage

Set Parameters of Motion Sensor

Control Command

Status Request

Requests the device's current location and status report.

Reset

Resets all device parameters to factory defaults.

Preset

ACK of Emergency

Enable1

Disable1

Request IMSI

Request ICCID

ReqVer

Erase All

Initialize Traveled Distance

Initialize Message Number

Reboot

Request SIM IP Address

Trouble Shooting (LED Indicator)

Blue LED: Indicates LTE-M1 status.

Interprets the blue LED for LTE-M1 network status.

RED LED: Indicates GPS status.