ST4500 User Manual
28
4.2 RED LED: Indicates GPS status.
GPS Blink Count Remarks
Normal 1
No Fix 2
<Possible Cause>
1. If power on, GPS chipset is trying to find position during
some minutes.
2. GP
S antenna lays on weak or no GPS signal positi
on
3. GP
S antenna connection is not firm.
GPS Chipset Error
GPS Antenna Error
4
<Possible Cause>
1. GP
S antenna is disconnect
ed.
2. GP
S antenna or socket of GPS antenna is broke
n.
3. U
nit is broke
n.
Caution
Modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
IMPORTANT NOTE:
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20 centimeters between the radiator
and your body. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
FCC Compliance Information : This device complies with Part 15 of the
FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
*. Caution
- Don’t use USB Connect. USB Connect is only use for production.
- This product is fixed to the vehicle.
- Backup battery is used when the vehicle power is off.
To Previous Page
Loading...
