Need help?Do you have a question about the SunTech ST940 and is the answer not in the manual?
General| Channels | 72 |
|---|---|
| Update Rate | Up to 10 Hz |
| Accuracy | 2.5m CEP |
| Storage Temperature | -40°C to +85°C |
| Humidity | 5% to 95% non-condensing |
| GNSS | GPS, GLONASS, Galileo, BeiDou |
| Operating Voltage | 3.3V to 5V DC |
| Acquisition Time | Hot start: 1s |
| Power Supply | 3.3V to 5V DC |
Technical specifications for GSM/GPRS communication.
Technical specifications for GPS positioning.
Details on the device's operational capabilities and modes.
Controlling device power on/off and charging status.
Configuration of GPRS parameters, server info, and PIN lock code.
Setting intervals for location reports, alerts, and sensor values.
Enabling or disabling device functions via commands.
Commands for power control, report erasure, and location polling.
Commands to query device status and configuration.
Fields and data included in the Location Report.
Fields and data included in the Emergency Report.
Fields and data included in the Alert Report.
Fields in reports based on PROT_TYPE and ADD_INF combinations.
Step-by-step guide to install the USB driver for Windows 7.
Troubleshooting steps for the 'Alcatel Single RNDIS Interface' error.
How to output GPS NMEA data via USB Cable using specific commands.
To Next Page
