SunTech ST940 - Query Commands

Doc. Title
ST940 User Manual
Concerning:
Rev.
Date (dd-mm-yy)
Page of Pages
Features and how to configure ST940
1.19
0
19-06-15
15
26 of 51
If the command is sent through RS232, the device responds with location string and sends location
string through GPRS or SMS.
ACK (Server Acknowledgement about Alert)
● The following table shows how to make a command in order to stop sending alert.
Field
Marks
Value
Meaning
HDR
“ST910”
Model Name
COMMAND
“ACK”
Command Type
DEV_ID
6 or 9 char.
Digits ID of device. It is a part of IMEI. Please check the
“DEV_ID_TYPE” setting.
When the device receives this command while it is sending alerts, it stops sending alert.
<Example>
[command] ST910;ACK;123456789
[command] ST910;ACK;456789
[response] ST910;RES;ACK;123456789
[response] ST910;RES;ACK;456 789
Preset
● The following table shows how to make a command to read all of the parameters:
Field
Marks
Value
Meaning
HDR
“ST910”
Model Name
COMMAND
“PRESET”
Command Type
DEV_ID
6 or 9 char.
Digits ID of device. It is a part of IMEI. Please check the
“DEV_ID_TYPE” setting.
<Example>
[command] ST910;PRESET;123456789
[command] ST910;PRESET;456789
[response]
ST910;RES;PRESET;123456789;NETWORK;1;ict;dip;dip;183.109.78.85;8020;;;1;111.111.111.111;8021;REPO
RT;180;180;60;3;0.10;FUNCTION;1;0