SunTech ST940 - Alert Report

Doc. Title
ST940 User Manual
Concerning:
Rev.
Date (dd-mm-yy)
Page of Pages
Features and how to configure ST940
1.19
0
19-06-15
15
44 of 51
<Note>
When this message is sent, please charge battery of the device immediately.This information will be here only if
“ ADD_INF = 0”
Alive Report
Field
Marks
Meaning
HDR
“ST910”
Model Name
RPT_TYPE
“Alive”
Report Type
DEV_ID
6 or 9 char.
Digits ID of device. It is a part of IMEI. Please check the
“DEV_ID_TYPE” setting.
<Example>
ST910;Alive; 456789
ST910;Alive;123456789
<Note>
“Alive Report” is sent by device to connect again with the server when connection with the server is broken.
Alert Report
Field
Marks
Meaning
HDR
“ST910”
Model Name
RPT_TYPE
“Alert”
Report Type
DEV_ID
6 or 9 char.
Digits ID of device. It is a part of IMEI. Please check the
“DEV_ID_TYPE” setting.
SW_VER
3 char
Software version.
This information will be here only if “ PROT_TYPE = 0”
DATE
String
YYYYMMDD
TIME
String
HH:MM:SS, 24 hours format, UTC
CELL
String
Information of Cell ID
Cell ID(4digits hex) + Location Code ID(4 digits hex) + Serving Cell
BSIC(2 digits decimal).
This information will be here only if “ PROT_TYPE = 1”