SunTech ST4500 - Request IMSI; Request ICCID; ReqVer

ST4500 User Manual
24
[response] ST4500CMD;Res;850000;010;Disable1NoUse (in case that IN type is set to ‘No Use’).
<notes>
** Output1 line goes to inactive status.
4-11-9. Request IMSI
● Definition : Request the unique SIM ID.
Field Definitions Unit Remark
CMD_ID “ReqIMSI” Request IMSI (unique SIM ID)
If received, device sends IMSI of using SIM.
<example>
[command] ST4500CMD;850000;02;ReqIMSI
[response] ST4500CMD;Res;850000;010;ReqIMSI;724031111553779
4-11-10. Request ICCID
● Definition : Request the ICCID.
Field Definitions Unit Remark
CMD_ID “ReqICCID” Request ICCID (sequence number that is displayed on SIM)
If received, device sends ICCID of using SIM.
<example>
[command] ST4500CMD;850000;02;ReqICCID
[response] ST4500CMD;Res;850000;010;ReqICCID;89550230000084256668
4-11-11. ReqVer
● Definition : Request software version.
Field Definitions Unit Remark
CMD_ID “ReqVer” Request device version
Device reports Model, Buyer, Protocol and S/W release
version.
<example>
[command] ST4500CMD;850000;02;ReqVer