SunTech ST3310 - Initialize Traveled Distance; Initialize Message Number; Reboot

ST3310 User Manual
25
[response] ST3310CMD;Res;850000;010;EraseAll
4-11-13. Initialize Traveled Distance
● Definition : Initialize the travel distance.
Field Definitions Unit Remark
CMD_ID “InitDist” Set traveled distance to 0.
<example>
[command] ST3310CMD;850000;02;InitDist
[response] ST3310CMD;Res;850000;010;InitDist
4-11-14. Initialize Message Number
● Definition : Initialize the message sequence number.
Field Definitions Unit Remark
CMD_ID “InitMsgNo” Set message number to 0.
<example>
[command] ST3310CMD;850000;02;InitMsgNo
[response] ST3310CMD;Res;850000;010;InitMsgNo
4-11-23. Reboot
● Definition : reboot unit.
Field Definitions Unit Remark
CMD_ID “Reboot” Reboot device.
<example>
[command] ST3310CMD;850000;02;Reboot
[response] ST3310CMD;Res;850000;010;Reboot