Features and How to set parameters
Suntech International Ltd.
- Checking Connectivity of GPS Antenna
Device alerts when GPS antenna is disconnected. It is applicable only to the device models which have the
external antenna.
- Checking Status of Main Power Source
Device recognizes its connectivity with the main power source (i.e. vehicle’s battery) and is able to inform
the server about status on whether or not the main power line is disconnected. The device is also able to
inform the server about the voltage level status of the main power source and informs the server in case the
voltage level of the main power source drops down below the pre-set value. This function is applicable to
battery-installed device models only.
- Alerting Battery Error
Device sends an alert when a battery charging error occurs. This function is applicable only to the device
models available with back-up battery.
To Next Page
