ST4340 User Manual
31
4.2 RED LED: Indicates GPS status.
GPS Blink Count Remarks
Normal 1
No Fix 2
<Possible Cause>
1. If power on, GPS chipset is trying to find position during
some minutes.
2. GP
S antenna lays on weak or no GPS signal positi
on
3.
GP
S
antenna connection is not firm.
GPS Chipset Error
GPS Antenna Error
4
<Possible Cause>
1. GPS antenna is disconnected.
2.
GP
S
antenna or socket of GPS antenna is broken.
3.
Unit
is broken.
*. Caution : Don’t use USB Connect. USB Connect is only use for production.
Caution
Modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
IMPORTANT NOTE:
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20 centimeters between the radiator
and your body. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
FCC Compliance Information : This device complies with Part 15 of the
FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
To Previous Page
Loading...
