EasyManua.ls Logo

Sunwoda Atrix basic-5 Series - Physical Installation Requirements

Sunwoda Atrix basic-5 Series
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Avoid rain and snow
Avoid flood-prone locations
Install under shed if possible
3 feet of clearance from doors, windows, driveways, or other batteries
Keep away from heating equipment.
Protection against corrosive chemicals
Prevent water from spilling
e. Consider locations with ventilation fans, smoke, heat or combustible gas detectors.
Warning!
Use of Atrix basic outside of the temperature range may cause irreversible damage to it
Note: If Atrix basic is used below 10 degrees or above 40 degrees, the charging and discharging
current of Atrix basic may decrease.
2.1.2 Physical installation requirements
This simple bracket is optional. Assuming that the client has a cabinet or bracket designed to meet
the standard 19inch and 3U height installation, it is not necessary to choose this suggestion and
ignore the following installation methods.
a. Product installation dimensions
BATT
Indoor
BATT
Outdoor