ENJOYING YOUR HOT TUB OR SWIM SPA
| 35
Wi
This funcon is available only if an in.touch module is
connected to your system. In.touch is an oponal extra.
Wi Sengs
To modify wi network sengs, slide the right wheel
unl the wi icon is highlighted in the middle.
Wi Networks
Aer a few seconds the available networks will appear
on-screen, as well as their signal strength.
Select network will be idened by a green check mark.
Swipe Up or Down the list to select your network.
Wi Network Password
If the wi network is password protected, enter it
when keyboard prompts. Use Enter key to validate the
password. If no password is required the in.touch will
connect automacally.
Wi (in.touch 2)
When a in.touch 2 is detected, this network will appear
(in.k1000+ version 12 and older).
in.touch Module Not Connected
If the in.touch module of your spa system is not
connected, this message will be displayed.
To Next Page
Loading...