Superior Gecko - Components and Features

COMPONENTS
AND FEATURES
Waterfall Valve
Some hot tubs are equipped with a waterfall feature.
To start this, please turn on one of the jet pumps
then turn the waterfall diverter clockwise unl the
waterfall appears.
By opening and closing the waterfall diverter on the
hot tub surface, you can adjust the water ow from
high to low.
Jets and Valves
Your new hot tub or swim spa will include a variety
of jets which will provide a hydrotherapy massage
and will oer you various massage modes.
To nd your suitable mode: adjust the diverter
valves and the air regulang valves.
(See page 34 for jet descripons)
Diverter Valves
The diverter valves are the largest valves and allow you
to divert the water from one seat to another. Adjusng
the diverter valve allows you to increase the pressure
in one seat and reduce in another. When the diverter
is in the middle, even pressure will ow throughout the
dierent seats that the diverter controls.
Important: when the diverter is in the ‘middle
posion’ the jets cannot provide the maximum
pressure.
Air Regulang Valve
The air control funcon allows you to enjoy
massages with dierent pressures from the jets.
By turning the air regulator on, you can control the
jet pressure by adding more air into the water ow.
Some seats will not work o of these regulators
and will instead have an air manifold inside the hot
tub that will constantly allow air
into the jets.
ENJOYING YOUR HOT TUB OR SWIM SPA
| 37